Projects

  • Reset

Power for a large detached house supplied by a 7.59kW PV array and a 14.2kWh Energy Storage System

To reduce electricity bills we installed a 7.59 kW PV array connected to a 14.2 kWh capacity Energy Storage System (ESS). Between late spring and early autumn this array offsets...

View Project

Prestigious new build property with large PV array, heat pump and boiler stove providing power, heating, hot water and EV charging

We were involved at the outset in the design of the power, heating and hot water systems for this capacious new build property, which looks out over the South Downs....

View Project

PV array and a solar thermal collector mounted on the flat roof of a large detached house in a stunning coastal location

This large detached house is located in a spectacular coastal setting with views across the channel to France. We installed a 2.75 kWp PV array and a 20-tube solar thermal...

View Project

PV array mounted on the flat roofs of two adjacent apartment blocks

This new development is located in an urban area and is comprised of two 3-storey buildings with 9 luxury apartments. The heating and hot water for each of the apartments...

View Project

Recently renovated 18th century cottage supplied with heating and hot water by a 12kW NIBE F2040 air source heat pump

This 3 bedroom cottage dates from 1736. It has been extensively renovated and extended with upgraded insulation by its new owners. Heating and hot water is supplied by an air...

View Project

Roof-integrated photovoltaic and solar thermal arrays providing hot water and electricity to a ‘Passivhaus’ home on an exposed rural site

This house has been constructed to ‘Passivhaus’ standards of insulation and airtightness. A Nu-Lok roofing system has been used incorporating large integrated photovoltaic and solar thermal arrays on each wing...

View Project

Rural detached house with heating and hot water supplied by an 16kW heat pump and electricity consumption offset by a PV array

When this detached rural property was originally refurbished and extended we installed a PV array. A few years later the owners asked us to return to replace their old oil-fired...

View Project

Rural new build with a 40-tube solar thermal array and heating from a GSHP supplemented by a wood stove.

This new build is set in a rural area and has been constructed to a high standard of insulation and airtightness. It is heated by a GSHP linked to underfloor...

View Project

Semi-detached new builds each with an in-roof mounted PV array and a 6kW NIBE F2040 air source heat pump providing heating and hot water

Each of these 3-bedroom semi-detached new build properties is supplied with heating and hot water by a 6kW NIBE F2040 air source heat pump. The electricity consumed by the heat...

View Project

Single storey annexe to a listed building with a 4.76 kW in-roof mounted PV array and heating and hot water supplied by a 16kW air source heat pump

This single storey 1-bedroom new build has been designed and constructed to a high standard of energy efficiency. It serves as a detached annexe to a listed ex-Wesleyan Chapel and...

View Project

Single storey conversion with main heating from an air source heat pump into UFH and solar thermal providing hot water

This single storey conversion is in a rural area and the new owners were keen to avoid using an oil-fired boiler for heating and hot water. Despite its location within...

View Project

Single storey new build with heating and hot water supplied by an 8kW NIBE F2040 air source heat pump

This single storey new build has been designed and constructed to a high standard of energy efficiency. It uses an 8kW NIBE F2040 air source heat pump (ASHP) to maintain...

View Project