Projects

  • Reset

Photovoltaic Thermal (PVT) array installed on the Chemistry and Physics Laboratory Building at Warwick University

We have installed an 8.4 kWp PVT array comprising 48 PowerTherm panels on this 6-storey roof at Warwick University. The array is mounted on purpose-built, ballasted aluminium frames. The base...

View Project

Photovoltaic Thermal (PVT) system linked to a heat pump heating a thermal store, integrated alongside a wood stove with boiler

The main heating and hot water for this detached modern house is provided by a heat pump linked to a 500 litre thermal store. The heat pump extracts heat from...

View Project

Photovoltaic Thermal (PVT) system linked to a thermal store, integrated alongside a gas-fired boiler

This 4-bedroom detached house has been transformed by an extensive retrofit to improve its energy efficiency. Measures taken include external insulation provision of heat by a heat pump linked to...

View Project

PV array and a solar thermal collector mounted on the flat roof of a large detached house in a stunning coastal location

This large detached house is located in a spectacular coastal setting with views across the channel to France. We installed a 2.75 kWp PV array and a 20-tube solar thermal...

View Project

Roof-integrated photovoltaic and solar thermal arrays providing hot water and electricity to a ‘Passivhaus’ home on an exposed rural site

This house has been constructed to ‘Passivhaus’ standards of insulation and airtightness. A Nu-Lok roofing system has been used incorporating large integrated photovoltaic and solar thermal arrays on each wing...

View Project

Roof-integrated photovoltaic and solar thermal arrays providing hot water and electricity to the Thanet Wind Farm shore facility building

This purpose- built shore facility is located beside Ramsgate harbour. It is used as a base to provide logistical support and storage of equipment used for the ongoing maintenance of...

View Project

Rural new build with a 40-tube solar thermal array and heating from a GSHP supplemented by a wood stove.

This new build is set in a rural area and has been constructed to a high standard of insulation and airtightness. It is heated by a GSHP linked to underfloor...

View Project

Single storey conversion with main heating from an air source heat pump into UFH and solar thermal providing hot water

This single storey conversion is in a rural area and the new owners were keen to avoid using an oil-fired boiler for heating and hot water. Despite its location within...

View Project

Small 19th century terraced house in an urban conservation area with east/west solar collectors and electric storage heaters

Dual orientation solar collectors installed at this small terraced cottage located in an urban conservation area. Two 20 tube collectors are set on either side of the steep east-west pitch....

View Project

Solar collectors heating an outdoor swimming pool and supplying domestic hot water

This is a combined solar thermal system which heats both a vented twin coil hot water cylinder and a 36m2 outdoor swimming pool at a 4 bedroom converted Oast located...

View Project

Solar combi system with twin solar coil thermal store and mechanical ventilation with heat recovery

This 4-bedroom detached house has achieved ‘Passivhaus’ standards of insulation and airtightness.   Invicta Clean Energy installed a solar ‘combi’ system with 2 x 30 tube solar collectors linked to a...

View Project

Solar thermal array heating a swimming pool within the curtilage of a grade 1 listed building

This large indoor swimming pool lies within the curtilage of a Grade 1 listed building. The pool is in use throughout the year and to reduce the energy used to...

View Project